A powerful model for wide thread ranges and high-torque heavy applications. The AR810 forms M8–M10 threads with 750 W of servo power and automatic tap retraction.
| Thread Range | M8 – M10 |
| Recommended Tap | M8, M10 |
| Pilot Drill Ø | 7.40 – 9.30 mm |
| Motor Power | 750 W |
| Tap Speed | 2500 rpm |
| Max. Motor Speed | 5500 rpm |
| Stroke (X) | 22 – 25 mm |
| Body Size (L×K) | 80 × 165 mm |
| Drive Type | Direct Drive |
| Air-Assisted | Yes |
| Control Panel | LCD |
| Operating Mode | Automatic / Manual |
| Warranty | 2 Years |
This unit must be used exclusively with form (fluteless / roll) taps. Conventional cutting taps create chips in in-die operation and cause damage.
Compact model for small thread sizes and tight center distances. M3–M4 threads, 400 W servo, fast tap change.
A balanced model for medium thread sizes. M5–M6 threads, 4.65–5.55 mm pilot drill, 400 W servo; a controlled 1460 rpm tap speed for torque on larger threads.